> Cannot Open
> Snmpd Pcilib: Cannot Open /proc/bus/pci
Snmpd Pcilib: Cannot Open /proc/bus/pci
If your installation fails due to firewall issues, you should follow the instructions in the troubleshooting section of this guide. Facter 1.6.18 (maint) Fix failing manufacturer spec on Solaris 10 Without this patch the specs are failing against solaris 10. When server is reboot it's grad initrd image via tftpd with preinstalled default system, and comes puppet and configure everything. there is nothing to do [[email protected] ~]# pacman -S hwinfo error: target not found: hwinfo [[email protected] ~]# hwinfo -bash: hwinfo: command not found [[email protected] ~]# I need to know what chips have a peek here
It was ignoring modulepath in /etc/puppet/puppet.conf. [2012/10/08 01:48:08] garthk: puppet apply does ignore the modulepath (if that's what you were up to) [2012/10/08 01:48:28] @ Wicla_ is now known as Under ruby 1.8.7, this class is not a StandardError, and so wasn’t rescued. If you are about to run out of disk, and cannot immediately upgrade PE on your console server, you can: Download this updated rake fragment. I completely agree, as that is what I did to start with, but after a discussion with a programmer friend, also agree with the "abuse" of sprintf for mere string copying.
Snmpd Pcilib: Cannot Open /proc/bus/pci
Using RbConfig seems more reliable and much simpler. (#5205) Update facter manpage This commit doesn’t handle the request in the ticket of dynamically generated manpage, but it does update the man line or does it mean it includes it but you are setting it to something like undef? [2012/10/08 02:57:00] blendedbychris: not setting it in a way that the dfault gets bit in your resource at all [2012/10/08 02:57:04] i don't set dvr. [2012/10/08 02:57:11] blendedbychris: setting it to undef isnt not setting it, its setting it to undef [2012/10/08
but agreed that the apt module has more options [2012/10/08 00:05:44] and works! [2012/10/08 00:05:55] true ;) [2012/10/08 00:06:02] @ Quit: bapa: Remote host closed the connection [2012/10/08 00:06:08] However, it hasn't been this way for the majority of the time x86 has been around. In PE 2.0.3 and later, these facts are kept accurate by requiring the necessary packages from the OS’s repository. Raspberry Pi Thanks to Feifei Jia [email protected] for contributing the original code. (#11196) Scan all arp entries for an ec2 mac This patch now scans all arp entries for the magic EC2 mac
Upgrading to PE 2.0.0 requires you to edit the /etc/puppetlabs/httpd/conf.d/passenger-extra.conf file, on both the puppet master and the console server, so that it looks like this: # /etc/puppetlabs/httpd/conf.d/passenger-extra.conf PassengerHighPerformance on PassengerUseGlobalQueue Lspci Command Not Found Browse other questions tagged linux drivers graphics-card arm bus or ask your own question. You could lsmod and take a look at your existing modules. https://projects.puppetlabs.com/issues/12813 Facter 1.6.4 (#11041) Add dmidecode as a requirement for rpm We were implicitly relying on dmidecode to determine certain facts without being certain that it was installed.
This makes it difficult to model reality inside of Puppet. The fact that we were mixing the indentation was causing people to mix them within files - sometimes using 4 space, sometimes 2 space. It also writes the bat file in ‘text’ mode so that the resulting file has ‘\r\n’ line endings. (#10444) Add identification of system boards to Facter Facter 1.6.3 (#7038) Validate prtdiag Although it is included in subsequent PE releases, you can download it here.
Lspci Command Not Found
What's the new advice? (Best of all: has someone gathered all this "hey, you're upgrading to Puppet 3, here's all the things you're going to run into" stuff into one document?) click site Which is when people assure me it'll all be better in Puppet 3. Snmpd Pcilib: Cannot Open /proc/bus/pci Facter 1.6.9 (#11511) Split lsb facts into multiple files If a fact is stored in a file that does not follow the convention $factname.rb, we may encounter ordering and recursion issues Pcilib Cannot Open /proc/bus/pci Ubuntu Security Issue: X-Forwarded-For Headers Are Respected for Unauthenticated Requests This issue was fixed in PE 2.0.3.
How do I make an alien technology feel alien? navigate here I learned my lesson when I implemented the Mac OS X System Profiler sp_* facts. This change removed the ‘addr:’ string which prevents the regex from matching. This is a problem because the lack of these facts make it difficult to write Puppet manifests that work on HP-UX and other platforms like Linux that support the processorX facts. Lshw
These can be uncommented after (#17808) is fixed. (#15001) ifconfig regex will optionally match ‘addr:’ Newer versions of ifconfig, as found in Fedora 17, have changed the output format of ifconfig. It then used constant file names within the temp directory to re-write the files in ruby’s bin directory, and bat wrappers on Windows. Ubuntu was added as a special case, OpenBSD was collapsed into the current architecture fact and Darwin was added by removing the kernel confine statement for the architecture fact. Check This Out Previously we were unable to check processor type and count on other architectures for linux.
This patch addresses the problem by providing a Bundler compatible Gemfile that specifies all of the Gem dependencies for the Puppet 2.7 application. We therefore dont have to run load_all in the middle of a fact resolution. (#14332) Correct stubbing on Ubuntu The tests for facter fail on Ubuntu because lsbdistid is not correctly These failures: Are limited to the console server Usually affect sites with a very large console database Are triggered by a MySQL error when running database migrations The upgrader’s output in
adding that to the definition, and it no longer fails ...
Update the OpenVZ fact to be slightly more resilient in it’s checking of OpenVZ, so it doesn’t clash with CloudLinux’s LVE container system. (#6740) facter doesn’t always respect facts in environment How comes it is possible to change de value of a variable now ? [2012/10/08 08:04:27] that would be my guess. It's seems to be obvious that whole configuration is based on puppet. ii libshadow-ruby1.8 1.4.1-8 Interface of shadow password for R ii lsb-base 3.2-23.2squeeze1 Linux Standard Base 3.2 init scrip ii puppet-common 2.6.2-5+squeeze6 Centralized configuration manageme ii ruby1.8 126.96.36.1992-2squeeze1 Interpreter of object-oriented scr
I don't mind leaving your patch as is, but I do appreciate a note in the upstream bug tracker. This is very much a work in progress, but a model for how packaging automation could improve across many Puppet Labs projects. (#11640) Added support for new OpenStack MAC addresses OpenStack The lesson learned is that we should not implement facts specific to a single platform, but instead re-use the existing platform-agnostic and consistent facts we have. this contact form Detail¶ https://github.com/puppetlabs/facter/blob/master/lib/facter/util/resolution.rb#L103 I think, doesn’t cause STDERR to be caught.
Added more cloudlinux detection, which has /proc/lve/list present on cloudlinux hosts. I could be quite wrong about some of this and welcome corrections. Hang on… it's puppet::storeconfigs using puppetdb::storeconfigs. [2012/10/08 01:27:56] So, I need to pull his puppetdb modu… damn. Delete now-unused fixture file who_b_boottime. (#14764) Stop calling enum_cpuinfo and enum_lsdev on unsuitable platforms Without this patch, the platform specific utility methods on Facter::Util::Processor named enum_cpuinfo and enum_lsdev are always called
For now, the noise can be suppressed by directly patching the /opt/puppet/lib/ruby/site_ruby/1.8/facter/virtual.rb file, as shown below: diff --git lib/facter/virtual.rb lib/facter/virtual.rb index e617359..94b10c5 100644 --- /opt/puppet/lib/ruby/site_ruby/1.8/facter/virtual.rb +++ /opt/puppet/lib/ruby/site_ruby/1.8/facter/virtual.rb @@ -89,7 +89,7 @@ but when running pip it doesn't appear to see mysql_config [2012/10/08 02:50:36] how to do it in 2.7.5 [2012/10/08 02:50:37] is there a specific way I can help puppet Thanks! _______________________________________________ Cocoa-dev mailing list ([email protected]) Please do not post admin requests or moderator comments to the list. https://github.com/puppetlabs/facter/blob/master/lib/facter/virtual.rb#L96 calls lspci, which on nodes without PCI, such as XEN hosts, complains bitterly: [[email protected]:~]% lspci >/dev/null pcilib: Cannot open /proc/bus/pci lspci: Cannot find any working access method. [[email protected]:~]% ls -lA
If your database server’s root password contains certain non-alphanumeric characters, the uninstaller may not be able to log in and delete PE’s databases, and you will have to remove them manually.
© Copyright 2017 cluefest.com. All rights reserved.